Furnace Repair In Beaverton, OR

A furnace breakdown can be a major inconvenience, especially during the cold winter months. Not only does it affect your comfort, but it also puts your health and safety at risk. When faced with such a situation, you need a reliable HVAC company to provide prompt and professional furnace repair services. Wolcott offers the best furnace repair services in Beaverton and the surrounding areas. 

Call For A Free Estimate

Common Furnace Problems and Solutions

Some of the common furnace issues and their solutions are:

No Heat Output

Problem: You turn on your furnace, but it doesn’t produce any heat.
Solution: 

• Check the thermostat settings and ensure it’s set to “heat.”
• Inspect the circuit breaker to make sure it hasn’t tripped.
• Replace the air filter, as a clogged filter can restrict airflow and hinder heating.

Insufficient Heat

Problem: Your furnace is producing some heat, but it’s not enough to keep your home warm.
Solution:

• Clean or replace the air filter to improve airflow.
• Inspect and seal any gaps or leaks in your home’s insulation.
• Schedule professional maintenance to clean and tune your furnace for optimal performance.

Frequent Cycling

Problem: Your furnace turns on and off frequently, known as short cycling.
Solution:

• Check for a clogged air filter and replace it if necessary.
• Ensure the thermostat is correctly calibrated and not placed near drafts.
• If the problem persists, contact a Beaverton furnace repair professional to inspect and resolve potential component issues.

Loud or Unusual Sounds

Problem: You hear strange sounds such as banging, squealing, or rattling when the furnace operates.
Solution:

• Squealing noises may indicate a worn-out or loose blower belt, which should be replaced.
• Rattling sounds could result from loose or damaged components requiring tightening or replacement.
• Banging noises might be due to dirty burners or delayed ignition, necessitating professional attention.

Pilot Light Problems

Problem: The pilot light won’t stay lit, or it goes out frequently.
Solution:

• Clean the pilot light orifice to remove debris.
• Ensure the gas supply is not interrupted and the gas valve is in the correct position.
• If the pilot light continues to go out, there may be an issue with the thermocouple or gas valve that requires professional repair.

Furnace Troubleshooting and Maintenance Tips

Taking good care of your furnace can help prevent many common problems. 

Here are some troubleshooting and maintenance tips to keep your furnace in top shape:

• Regularly Change Air Filters: A clogged filter can lead to reduced efficiency and overheating, potentially causing damage to your furnace. Check, clean, and replace your air filter every 1-3 months, depending on usage.
• Clean and Clear Vents and Registers: Ensure that vents and registers are free from obstructions such as furniture, curtains, or debris. Blocked vents can disrupt the airflow, leading to uneven heating and strain on your furnace.
• Keep the Area Around the Furnace Clear: Maintain a clutter-free zone around your furnace. Avoid storing items or placing objects too close to them. This ensures proper ventilation and reduces fire hazards.
• Test Your Thermostat: Regularly test your thermostat to make sure it’s functioning correctly. If you notice any discrepancies in temperature or issues with the thermostat, consult a furnace repair professional in Beaverton to recalibrate or replace it.
• Schedule Annual Professional Maintenance: Regular maintenance by a certified HVAC technician is essential for your furnace’s longevity and efficiency. Wolcott has been providing maintenance services since 1978, and our NATE-certified technicians are experts at keeping your furnace in peak condition. An annual maintenance visit can identify and address potential issues before they become major, saving you time and money.

The Importance of Regular Maintenance

Routine furnace maintenance is akin to visiting the doctor for a check-up. It helps identify underlying issues early, preventing more significant problems down the road. 

Here’s why you should prioritize regular furnace maintenance in Beaverton:

• Improved Efficiency: A well-maintained furnace operates at peak efficiency, lowering energy bills and reducing environmental impact.
• Enhanced Comfort: Properly maintained furnaces distribute heat evenly throughout your home, ensuring consistent comfort in every room.
• Maximized Lifespan: Regular maintenance can significantly maximize your furnace’s lifespan, saving you the cost of premature replacement.
• Safety Assurance: Annual maintenance checks include inspections for gas leaks and carbon monoxide leaks, keeping your family safe.

When to Call a Professional for Furnace Repair

While some furnace issues can be addressed with basic troubleshooting, there are instances where professional intervention is necessary. 

Here are signs that it’s time to contact Wolcott:

• Lack of Heat: If your furnace isn’t producing heat despite your troubleshooting efforts, it’s time to call in our Beaverton furnace repair experts.
• Unusual Odors: Strange smells, especially those resembling gas or burning, indicate a serious problem. Evacuate your home immediately and call for help.
• Gas Leaks: If you smell gas or suspect a leak, leave your home immediately, shut off the gas supply, and contact a professional and your gas company.
• Carbon Monoxide Alarms: If your carbon monoxide detector goes off, evacuate your home immediately and seek professional assistance.
• Electrical Issues: To prevent electrical hazards, a qualified technician should handle any problems with your furnace’s electrical components.
• Persistent Problems: If you’ve attempted troubleshooting without success, or if the same issue keeps recurring, it’s time to consult a furnace repair professional in Beaverton.
• High Energy Bills: If your energy bills are higher than usual, it could be due to a malfunctioning furnace working harder than it should be to heat your home.
• Poor Air Quality: If you notice dust, debris, it could be due to a dirty or clogged air filter or a malfunctioning furnace that needs repair.

Wolcott has been proudly serving since 1978. Our NATE-certified technicians are committed to providing top-notch furnace repair services in Beaverton, OR, and the surrounding areas. With 24/7 emergency service, we’re here when you need us most.

Trust Wolcott for Professional Furnace Repair

At Wolcott, we understand that your furnace is a critical component of your home's comfort. That’s why we offer top-quality furnace repair services to ensure your system runs efficiently and safely. We have the knowledge, experience, and tools to repair any type of furnace, regardless of the brand or model.

We follow a comprehensive repair process that includes the following:

• Inspection: We inspect your furnace to identify the root cause of the problem.
• Diagnosis: We diagnose the problem and offer the best solution to repair your furnace.
• Repair: We repair your furnace using high-quality replacement parts and equipment.
• Testing: We test your furnace to ensure it runs safely and efficiently.
• Maintenance: We offer maintenance services to ensure your furnace runs optimally and prevents future breakdowns.

We take pride in our work and strive to offer the best furnace repair services in Beaverton. We aim to provide prompt, professional, and reliable services to ensure your home is comfortable and safe.

Don't let furnace problems leave you in the cold this winter. Contact Wolcott  today for all your furnace needs in Beaverton, OR.