503-850-0703

CCB:#11220

WA LIC# WOLCOP 936BC

24/7 Emergency Service

(503) 487-0267

Most Common Furnace Problems

Most Common Furnace Problems

When your furnace is in good working order, you don’t give it a second thought. However, when something goes wrong at the most inconvenient time, such as in the middle of the night, no one likes to wake up shivering. So it is essential to understand the following frequent furnace problems that might impair the heating effectiveness of your HVAC system:

Not Enough Heat Produced

Even when the furnace is on, you are still cold. Check the air filters for dirt or have them serviced by heating repair services because clogged filters are the most common cause of ineffective furnace heating.

Blower Belt Slipped or Frayed

A slipping or frayed blower belt might result from a variety of circumstances. A high-pitched shriek will identify this issue.

Problems With Electronic Ignition or Pilot Control

A furnace with a broken ignition or pilot control problem reduces the amount of heat that enters your home.

Malfunctioning Thermostat

If your thermostat fails, you may notice problems with your system’s fans or comfort levels. To find the most satisfactory solutions, contact a furnace repair specialist like furnace repair in Beaverton now.

Dirty Filters

Furnaces with clogged filters must work harder. As a result, the limit switch may be damaged for an extended period and incur higher energy costs.

Strange Noises From the Furnace

If the furnace’s blower makes a grinding or scraping sound, it signifies the ball bearings have worn out. Turn off the machine right away and contact a skilled technician such as furnace replacement in Portland. We also recommend getting a yearly furnace tune-up to help reduce the possibility of problems with your system.

It can also aid in detecting a possible problem before it arises. A screeching or shrieking noise indicates that your blower belt has slipped or is worn out. The blower fan belt can potentially cause the furnace to turn on, but no air can circulate.

Pilot Light Flickering or Yellow

If you notice a yellow or flickering pilot light, you may have an excess of carbon monoxide in your gas furnace.

Flame’s Color

A blue glow shows that your heater is running well and produces enough heat; however, more brilliant yellow and orange tinges in it suggest that your furnace requires maintenance.

No Air Coming From the Furnace

Check to see if the blower is working via the inspection window. Many furnaces have flashing lights to signal a defect in the blower (green for regular operation and red for failure). If you don’t understand what’s going on, don’t put yourself through it; instead, book a visit from an experienced heating repair specialist to deal with it.

Gas Supply Issue

Maybe the furnace and its components are in good shape, but it isn’t getting enough fuel to run. In addition, you must inspect the gas supply line for leaks and valve problems from the burner to the primary input. A quivering burner pilot indicates that your furnace lacks adequate gas supply.

Call Wolcott now at 503-487-0267, and we will be able to tell you whether it’s furnace repair in Beaverton or is there any other issue.

Scroll to Top